Land Mobile Repeaters - IC-FR3000 Icom’s new all-in-one repeater operates as a desktop, rack mount, field or vehicle repeater or as a base station. This high powered (50W), feature rich, repeater with good specifications, also contains a built-in power supply and room for a duplexer and isolator. MORE POWER. 50 watts, 100% duty cycle operation. Transmit as long as you want.

ROOM FOR COMPONENTS. There's space to fit a duplexer and isolator inside this repeater.

DUPLEXER FINE TUNING. Tune the duplexer without removing the FR3000 from the rack. Makes installation and service calls quicker and easier.

DTMF REMOTE CAPABILITY. A DTMF signal allows you to control the repeater over the air from a remote location or over a phone line.

MUCH MORE:

32 Channels Switchable Wide/Narrow 12.5/25 kHz Telephone interconnect capable Master/Slave backup operation Accessory connector on rear panel Auto battery backup 5-Tone relay function CW ID transmitter Password and kill/stun feature for security Self check function checks for internal errors Programmable button gives access to customized functions

Land Mobile Repeaters - IC-FR4000 Icom’s new all-in-one repeater operates as a desktop, rack mount, field or vehicle repeater or as a base station. This high powered (50W), feature rich, repeater with good specifications, also contains a built-in power supply and room for a duplexer and isolator. MORE POWER. 50 watts, 100% duty cycle operation. Transmit as long as you want.

ROOM FOR COMPONENTS. There's space to fit a duplexer and isolator inside this repeater.

DUPLEXER FINE TUNING. Tune the duplexer without removing the FR4000 from the rack. Makes installation and service calls quicker and easier.

DTMF REMOTE CAPABILITY. A DTMF signal allows you to control the repeater over the air from a remote location or over a phone line.

MUCH MORE:

32 Channels Switchable Wide/Narrow 12.5/25 kHz Telephone interconnect capable Master/Slave backup operation Accessory connector on rear panel Auto battery backup 5-Tone relay function CW ID transmitter Password and kill/stun feature for security Self check function checks for internal errors Programmable button gives access to customized functions

This system consists of following items:

Icom CY-F221S 45W (50% duty cycle) or 20W 100% duty cycle 8ch 440-490MHz UHF programmable GMRS repeater with automatic battery backup system, AC power supply and duplexer tuned to your frequencies qty 1

Icom F4001 4W 16ch 450-512MHz UHF handhelds with chargers and Ni-Mh batteries qty 2

Comet CA-712EFC collinear base antenna 9.8db gain 200W, 10 ft long. qty 1

Icom CS-F100S programming software CD and OPC-1122U programming cable. qty 1 ea
System is tuned and programmed to your frequencies, shipping by UPS ground is included.

Only other items you needed are Andrew F4PNMV2-C N-male connectors and reccomended FSJ4-50B 1/2" heliax coax cable.

Normally it takes about 2-3 business days to tune a duplexer and programm repeater/radios after you have placed your order.
Please provide exact RX/TX frequencies and CTCSS (PL/DPL) tones in "comments" section while placing your order online.

This system consists of following items:

Icom CY-F221S 45W (50% duty cycle) or 20W 100% duty cycle 8 ch 440-490MHz UHF programmable GMRS repeater with automatic battery backup system, AC power supply and duplexer tuned to your frequencies qty 1

Comet CA-712EFC collinear base antenna 9.8db gain 200W, 10 ft long. qty 1

Icom CS-F100S programming software CD and OPC-1122 programming cable. qty 1 ea
System is tuned and programmed to your frequencies, shipping by UPS ground is included.

Only other items you needed are Andrew F4PNMV2-C N-male connectors and reccomended FSJ4-50B 1/2" heliax coax cable.

Normally it takes about 2-3 business days to tune a duplexer and programm repeater/radios after you have placed your order.
Please provide exact RX/TX frequencies and CTCSS (PL/DPL) tones in "comments" section while placing your order online.

You purchasing following item:

Icom CY-F221S 45W (50% duty cycle) or 20W 100% duty cycle 8ch 440-490MHz UHF programmable GMRS repeater with automatic battery backup system, AC power supply and duplexer tuned to your frequencies qty 1
Repeater is tuned and programmed to your frequencies, shipping by UPS ground is included.

Only other items you needed are Andrew F4PNMV2-C N-male connectors, FSJ4-50B 1/2" heliax coax cable and base antenna.

Normally it takes about 2-3 business days to tune a duplexer and programm repeater after you have placed your order.
Please provide exact RX/TX frequencies and CTCSS (PL/DPL) tones in "comments" section while placing your order online.

FR5000/FR6000 6.25 kHz Repeater

The FR5000/FR6000 series is the first Icom “IDAS” 6.25 kHz digital capable repeater, in

addition to the IC‐F3161D, F5061D series radios. The “IDAS” system increases existing

12.5 kHz channel capability and offers easy migration from analog to digital.

Key Features

Double Your Channel Capacity

• IDAS allows you to meet any narrow banding requirements today and provides a solution

to any future spectrum deficiencies.

Digital/Analog Mixed Mode Operation

• The FR5000/FR6000 can receive both analog and digital signals on a single channel.

Network Interface*

• The IDAS repeater has a network interface and can be connected to a LAN or the Internet

via Ethernet cable.

Digital Trunking Capability*

• The repeater will have digital Trunking capability in the future which will allow further

effective channel management.

19‐inch rack mount; 2U height low profile design

• A 2U higher configuration allows you to stack multiple units in an industry standard 19‐

inch rack

Two RF channel modules in one unit

• Two optional RF modules can be installed in a chassis to reduce installation space, while

the RF modules can be programmed and operated independently. LEDs on the front panel

show both channel conditions.

50W output at 50% duty cycle, 25W 100% duty cycle operation

D‐SUB 25‐pin accessory connector

• FR5000 series has a programmable D‐SUB 25‐pin accessory connector for connecting

various Trunking controllers or external remote control devices. Also,

modulation/demodulation signals can input/output from the D‐SUB connector.

*This features/option will be available in the future

Utilizes the IDAS™ 50W 50% duty cycle UR repeater module

Internal 110/220VAC power supply

Auto battery backup

Terminal screw connector for easy external battery connection

DB-25 connector

Three shielded data ports

Silver-plated "N" - type bulkhead RF connectors

Built-in grounding stud

Optional built-in duplexer – version specific

Optional built-in pre-selector – version specific

80 CFM heavy duty cooling fan – draws air from the top vents across the UR module for cooling